Wilko All Purpose Paint and Varnish Stripper 500ml is suitable for easy removal of paint or varnish on many surfaces from wood to metal to tiles! Prepapration: read label before use. Wear gloves. Protect floor coverings, textiles and vinyl materials. Shake container well before use. Directions for use: transfer the required amount of paint stripper into a suitable container. Apply a generous coat onto the surface to be stripped with a suitable brush at a rate of 1 litre per square metre of surface. Leave for approximately 1 hour and apply a second coat. Once the stripper has penetrated into the substrate, scrape off leaving the suface as clean as possible. Rub down stripped area using a scrubbing brush or stainless steel wool and water. Rinse with water and allow to dry.