Get the job done right with UniBond White Window and Door Frame Outdoor Sealant Cartridge. With great adherence to metal, wood, UPVC, and polycarbonate, this potent sealer ensures a durable bond. There is no need to be concerned about unsightly stains on delicate surfaces like marble and natural stone. It is versatile for various applications and is compatible with polycarbonate sheets, UPVC, metal, and wooden window and door frames. It is ideal for insulation, draught-proofing, and exterior cladding. To gain a perfect seal, you must first ensure the area being sealed is clean, dry and free of old sealant, grease and dirt. Furthermore, to make sure that surfaces are as clean as possible, use a cloth damped with white spirit to remove remaining grease and dirt. Using a sealant cartridge and gun: Cut the tip off the cartridge above the screw thread. Remove the nozzle cap and trim the nozzle at an angle of 45 degrees to the desired joint width. Screw the nozzle onto the cartridge and insert the cartridge into the gun. Apply by pulling the trigger. Storage: Store in a cool, dry place and protect from frost and direct sunlight. It provides a 25-year guarantee. Direction to use - surfaces must be dry and clean of dirt, loose materials and old sealant. Prepare the cartridge and apply it by pressing the trigger. Smooth within 5 minutes to achieve a perfect finish. For the best results, use the UniBond Sealant Finishing Tool. Remove excess sealant before it dries with white spirit. Protect the sealant from water and dampness. Fully dry in 24-36 hours, depending on bead size, temperature and humidity. Coverage is approximately 11m with a 6mm bead. Product Benefits at a Glance: Suitable for interior and exterior sealing, weather resistant, flexible.