UKSOL Plug-In Solar Pro Duo 2 Panel Hybrid Mount Kit 890W

Start harnessing the sun's power and enjoy a smarter approach to home energy with the UKSOL Plug-In Solar Pro Duo 2 Panel Hybrid Mount Kit 890W. This plug-in hybrid solar panel kit combines two 445W high-efficiency bifacial panels, an adjustable mounting frame and a smart microinverter 800W for convenient installation and monitoring. You'll get reliable performance with robust aluminium frames, heat-strengthened glass and IP67 waterproof protection, plus app connectivity so you can track your energy generation from anywhere. With everything included and a warranty, setting up renewable energy at home has never been easier. Please note: For optimum performance, position the panels facing south where possible, ideally at approximately a 35° angle, and avoid shading. What's Included: 2 x 445W TOPCon N-Type solar panels (1762 x 1134 x 30mm per panel), 1 x 800W smart microinverter, adjustable hybrid mounting frame, DC cable, 4m AC cable, and installation guidance. This product is not suitable for use on balconies. Can be used on the ground (ballasts required-not included) or mounted to a suitable wall only. Disclaimers: Do not use extension leads or coiled cable reels – connect the system directly to a suitable outdoor UK socket-outlet. Extension leads, adapters and coiled cable reels may not be suitable for continuous use and can increase the risk of overheating or damage. Electrical installation suitability – plug-in solar kits must only be connected to a suitable UK socket-outlet on an appropriate final circuit. The electrical installation must be in good condition and have suitable circuit protection and residual-current protection. Electrical assessment required where uncertain – if the socket, final circuit, consumer unit, protective devices, wiring, earthing or general condition of the electrical installation is damaged, unclear, unsuitable or unknown, have it assessed by a qualified electrician before connecting the system. Changes to household electrics – any alterations to fixed household wiring, circuit protection, socket-outlets or the consumer unit must be carried out by a qualified electrician. Age of the electrical installation – there is no specific maximum age for the property or household wiring. Suitability depends on the condition and adequacy of the electrical installation. Specifications: Solar Panels: Number of Panels: 2. Peak Power (PMax): 445W per panel / 890W total kit capacity. Module Efficiency: 22.3%. Cell Type: TOPCon N-Type Monocrystalline. Cell Configuration: 108 cells per panel / 216 total per kit. Panel Type: Bifacial glass-glass. Bifaciality: Up to 80%. Dimensions: 1762 x 1134 x 30mm per panel. Weight: 25.5kg per panel. Frame: 30mm anodised aluminium alloy. Front Glass: 2.0mm high-transmission AR-coated heat-strengthened glass. Back Glass: 2.0mm heat-strengthened glass (white grid glass). Junction Box Rating: IP68. Maximum System Voltage: 1500V DC. Maximum Fuse Rating: 35A. Operating Temperature: -40°C to +85°C. Fire Rating: Class C. Panel Electrical Specifications: Voltage at Maximum Power (Vmp): 33.0V. Current at Maximum Power (Imp): 13.49A. Open Circuit Voltage (Voc): 39.5V. Short Circuit Current (Isc): 14.01A. Power Tolerance: 0 to +5W. Smart Microinverter Specifications: Microinverter Rating: 800W. Maximum Continuous Output: 799VA. MPPT Channels: 2 independent MPPTs. Recommended Solar Module Range: 300W–730W. Peak Efficiency: 96.7%. Communication: Built-in Wi-Fi and Bluetooth. Protection Rating: IP67. AC Output Voltage: 230V AC. AC Output Frequency: 50Hz. Maximum Output Current: 3.5A. Operating Temperature: -40°C to +65°C. Monitoring: Smartphone monitoring app. Warranty: 10-Year Warranty.