Give new life to dull surfaces with the Stonecare4U Sealer's Gold Satin Finish All-Purpose Sealer. This solution seals surfaces effectively and gives them a beautiful and glossy satin-like finish. It offers premium coverage and is also oil and stain-resistant, making it a highly efficient sealer. Perfect for use on a variety of different surfaces, it'll help you save time and money by making your sealing experience simple and hassle-free. This is the ideal choice if you're looking for a beautiful and convenient sealer that works on just about any surface. Quantity: 5L. How to apply: Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e. gloves, suitable protective eyewear, face mask and clothing. Importantly, we always recommend performing a small test application in an inconspicuous area prior to use. This will indicate the suitability and effectiveness of the sealer for your surface. In addition, please make sure the surface is completely clean and dry before application. After that, apply generously and evenly with a low-pressure sprayer, roller, natural fibre brush or sponge, removing any excess sealer with a dry cloth after 20 to 30 minutes. Next, apply a second application after approximately 45 to 60 minutes, repeating the process. The sealer is highly effective, however, please note that it will take at least 24 hours before the product offers full protection. In the meantime, keep the surface free from water and oil spills, as stains may occur before the sealer has fully cured. Please Note: Above all, areas not to be sealed must be protected with masking materials. It is strongly recommended when using coloured grouts that a stain test is completed before proceeding. Maintenance: Clean sealed areas with a mild, pH-neutral cleaner or a very low concentration of our indoor cleaner range. Do not use harsh or abrasive cleaning agents as this can have a negative effect on the treated surface. Coverage: Apply undiluted, up to 30m² per litre per coat. This is dependent on the porosity of the surface. Check the surface after application to ensure the full effectiveness of the sealer.