StoneCare4U Essential Stone Floor Rejuvenator 2.5L

Enhance the appearance of the stone with the StoneCare4U Stone Floor Rejuvenator 2.5L. It is a specialised cleaner designed for all varieties of natural stone. It not only provides a fresh and clean surface but also adds a liquid wax sealing effect, enhancing the appearance of the stone. This product can be used as a finishing touch for professionally pre-sealed surfaces, offering an extra layer of protection against oil and water-based stains. Moreover, it is crucial for preserving and revitalizing natural stone by providing antimicrobial protection. This environmentally friendly cleaner highlights the innate beauty of various natural stone types. It is incredibly user-friendly, requiring only a clean cloth or sprayer to apply and buff to the stone. This versatile product is suitable for both indoor and outdoor use and offers UV protection. How to apply: Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e. gloves, suitable protective eyewear, face mask and clothing. Certainly, we always recommend performing a small test application in an inconspicuous area before use. This will indicate the suitability and effectiveness of the product for your surface. If unsuitable for your requirements, do not proceed but contact us to return the product. Make sure the surface is completely dry, thoroughly clean and free from waxes, sealants or coatings of any kind, before applying. Apply the product evenly with a low-pressure sprayer or cloth. Once the solution is applied to the surface, leave to penetrate for 10 to 15 mins then buff to a low to medium sheen. Dry to the touch in approximately 30 to 40 minutes, and cure fully within 24 hours. Test after application with water droplets, if droplets are absorbed a second or third coat may be necessary. Keep adults, children and pets out of the area until the product has fully dried. Important: Protect surfaces that are not to be sealed by masking off before starting work.