Tackle tough dirt and coatings on various surfaces effortlessly using the StoneCare4U Ultra Cleaner Pro 2.5L. Ideal for use on ceramic, porcelain, and natural stone like marble and limestone, this professional-grade cleaner contains potent solvents and cleaning agents that effectively dissolve stubborn stains, wax layers, and grease. With coverage of up to 25m2 per litre, the dilution rate will determine the actual coverage area when using Essential Ultra Cleaner Pro. Warning: Keep out of the reach of children and pets. How to apply: Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e. gloves, suitable protective eyewear, face mask and clothing. Certainly, we advise performing a small test application in an inconspicuous area on-site before use. This will indicate the suitability and effectiveness of the product for your surface. If unsuitable for your requirements, do not proceed but contact us to return the product. Depending on the stained or soiled area, Ultra Cleaner Pro can be used neat for removing waxes/coatings or diluted up to 10 parts water to 1 part for heavily soiled areas. Wet the area with clean water before applying the cleaner to the soiled area. Allow the cleaner to dwell for approximately 15 to 20 minutes, not allowing it to dry on the surface. After 15 to 20 minutes agitate with a stiff brush and clean water, scrub and rinse thoroughly with clean water. In cases of heavy soiling or staining, repeat the process increasing the amount of cleaner if necessary.