Make sure your stone receives the best care and protection by using the StoneCare4U Essential Gold Matt Finish Stone Sealer 1L. This versatile indoor sealer is designed to provide top-notch sealing and resistance to oil and stains for various indoor stone surfaces such as slate, limestone, granite, quartz, sandstone, travertine, marble, and more. It is a cost-effective solution that saves both time and money. Ideal for most porous textured stone and masonry surfaces indoors, although it is not suitable for highly polished, ceramic, glazed, or non-porous surfaces. How to apply: Before use, remove any loose debris from the work surface and ensure you have adequate safety wear, i.e. gloves, suitable protective eyewear, face mask and clothing. Importantly, performing a small test application in an inconspicuous area before use is also recommended. This will indicate the suitability and effectiveness of Matt Finish for your surface. In addition, please make sure the surface is completely clean and dry before application. After that, apply generously and evenly with a low-pressure sprayer, roller, natural fibre brush or sponge, removing any excess sealer with a dry cloth after 20 to 30 minutes. Next, apply a second application after approximately 45 to 60 minutes, repeating the process. The sealer is highly effective, however, please note that it will take at least 24 hours before the product offers full protection. In the meantime, keep the surface free from water and oil spills, as stains may occur before the sealer has fully cured. Please note: Above all, areas not to be sealed must be protected with masking materials. It is strongly recommended when using coloured grouts that a stain test is completed before proceeding.