SmartSeal Porcelain Tile Cleaner 5L 2 Pack

Clean your porcelain tile flooring and give it a fresh look with the SmartSeal Porcelain Tile Cleaner. It is a versatile and powerful cleaner that also acts as a disinfectant for cleaning porcelain patios, paths and driveways, as well as all types of indoor porcelain tiling. It is specifically formulated to work on any colour, type or texture of porcelain flooring, including polished, glazed, unglazed and anti-slip textures. It effectively removes dirt and grime, leaving your tiles looking fresh and vibrant. For the best results, apply this cleaner after diluting it in a ratio of 1:4 with clean water and then agitate with a stiff brush for 10-15 minutes. If you are using it externally as a porcelain patio cleaner, especially in warmer weather conditions, add more of this product if it starts to dry out too quickly. Rinse off with a hose, or if required, use a pressure washer once you are satisfied the porcelain tiles are clean. Not suitable for use with or around surfaces including enamel, zinc, chrome, stainless steel, polished marble, and limestone. Always protect these areas and test in an inconspicuous area on-site to determine suitability for the intended use. Take care to avoid contact with fabrics during application. This tile cleaner comes in a 2 x 5L pack. Average coverage is up to 10m² per litre. Coverage depends on porosity and the level of surface contamination. Store in a cool, dry area away from direct sunlight. Once opened use within three months.