- Extra-strong rug grippers designed to help keep rugs in place on fitted carpet.
- Angled spikes grip the rug backing to help resist movement and shifting.
- Full-footprint double-sided adhesive pads secure each gripper to the carpet.
- Low-profile matte black strips sit discreetly beneath the rug.
- Includes 4 rug grippers and 4 double-sided adhesive pads.
- Designed for rugs placed over fitted carpet; use suitable rug tape on hard floors.
- Install in minutes by peeling the backing, pressing each strip down, and laying the rug on top.
- Raked spikes lean into the rug to resist movement in the direction it is pushed.
- The 8-pack option provides additional grippers for large area rugs.
- Made using a dedicated tool to DIY Doctor's own specification, rather than a generic part.
- Extra-strong rug grippers designed to help keep rugs in place on fitted carpet.
- Angled spikes grip the rug backing to help resist movement and shifting.
- Full-footprint double-sided adhesive pads secure each gripper to the carpet.
- Low-profile matte black strips sit discreetly beneath the rug.
- Includes 4 rug grippers and 4 double-sided adhesive pads.
- Designed for rugs placed over fitted carpet; use suitable rug tape on hard floors.
- Install in minutes by peeling the backing, pressing each strip down, and laying the rug on top.
- Raked spikes lean into the rug to resist movement in the direction it is pushed.
- The 8-pack option provides additional grippers for large area rugs.
- Made using a dedicated tool to DIY Doctor's own specification, rather than a generic part.
A rug that will not stay put is a small problem you notice ten times a day. It creeps away from the sofa, rucks up in the doorway, and the corner you keep kicking back into place starts to curl for good. Laid over fitted carpet, a rug has almost nothing to grip against — which is exactly the job these are made for. DIY Doctor Rug Grippers fix a rug in position from both sides at once. Each strip carries a dense run of sharp angled spikes on its top face, which bite up into the rug backing, and a full-footprint double-sided adhesive pad on the underside, which holds the strip down onto the carpet below. The spikes are moulded at a rake rather than straight up, so they lean into the rug and hold hardest in the direction the rug is being pushed. That is the difference between a gripper that resists movement and one that simply sits under it. Fitting takes a couple of minutes. Peel the backing off a pad, press the strip firmly down at each corner of the rug, and lay the rug back on top. The strips are matte black on both faces and deliberately low, so they sit under the rug rather than showing as a ridge across it. They are made for rugs laid over fitted carpet — for hard floors, use a rug tape instead. The 4 pack gives you one gripper for each corner of a standard rug, runner or doormat. The 8 pack adds four more for large area rugs, where the long edges need holding as well as the corners. Both packs include one adhesive pad per strip, so there is nothing else to buy. This gripper is made on our own dedicated tool to our own specification — not a generic part bought in and boxed.
-
Brand:
-
DIY Doctor
-
Colour:
-
Black
-
Product Code:
-
11714553