Find a store

Wilko 22mm Compression Stop End

0526256

Wilko 22mm Compression Stop End

0526256
£3.99
£3.99
Delivery
18 in stock
Check store stock
View stock levels at a wilko store nearby

Product Information

  • Use for shutting off an open pipe
  • Resists corrosion
  • Easy to fit
Get that plumbing job done in no time with our quality plumbing products. Essential for both DIY and professional plumbers, the compression joint is ideal for use without using heat or soldering. Use the compression joints for shutting off an open pipe. The compression stop end resists corrosion. It is easy o fit. Size: 22mm. How to make a compression joint: Isolate the water. Pipe ends must be cut square and deburred. Remove nut (A) and olive (B) from fitting (C) if present. Jointing paste or PTFE tape may be applied to the threads. Slip nut (A) and olive (B) onto the pipe. Push the pipe into the fitting body until it goes no further. Slide nut (A) and olive (B) on the pipe onto the fitting and tighten the nut by hand. Hold fitting in one spanner and tighten nut half to one full turn with another spanner. Do not over-tighten. Repeat steps 3 to 9 for other ends if applicable. Turn on the water and check all joints are watertight.
Brand: Wilko
Type: Stop End
Colour: Gold
Pack Qty: 1
Size: 22mm
Customer Assembly Required: No
Height: 13.0CM
Width: 9.0CM
Depth: 1.8CM

Free Returns

Return this product for free within 14 days to The Range stores. Alternatively, contact customer services for more options.



View returns information

Shipped by the supplier

This product is only available online and sent directly to you from our supplier’s warehouse.

Delivery timescales may vary and will be accurately shown at checkout after entering your address.

Some postcode restrictions may apply, which can be found in the product information or after entering your address at checkout.

Our 14-day free returns policy applies to products shipped by our supplier but they cannot be returned in store.

Ideas & Advice

Ideas and Advice - Let's do it together

Loads of tips, hacks and how-tos to help you get your jobs done

Visit Ideas & Advice »

Product Information

  • Use for shutting off an open pipe
  • Resists corrosion
  • Easy to fit
Get that plumbing job done in no time with our quality plumbing products. Essential for both DIY and professional plumbers, the compression joint is ideal for use without using heat or soldering. Use the compression joints for shutting off an open pipe. The compression stop end resists corrosion. It is easy o fit. Size: 22mm. How to make a compression joint: Isolate the water. Pipe ends must be cut square and deburred. Remove nut (A) and olive (B) from fitting (C) if present. Jointing paste or PTFE tape may be applied to the threads. Slip nut (A) and olive (B) onto the pipe. Push the pipe into the fitting body until it goes no further. Slide nut (A) and olive (B) on the pipe onto the fitting and tighten the nut by hand. Hold fitting in one spanner and tighten nut half to one full turn with another spanner. Do not over-tighten. Repeat steps 3 to 9 for other ends if applicable. Turn on the water and check all joints are watertight.
Brand: Wilko
Type: Stop End
Colour: Gold
Pack Qty: 1
Size: 22mm
Customer Assembly Required: No
Height: 13.0CM
Width: 9.0CM
Depth: 1.8CM

You May Also Like

No Reviews Yet

Item removed from saved for later