Our 10-piece decorating kit with an extendable pole is ideal for a wide range of decorating jobs, including walls, ceilings, wood, metal and small surface areas. It includes a 9-inch (230mm) soft grip roller frame, a 9-inch (230mm) woven fabric roller sleeves, a 4-inch (100mm) soft grip mini roller frame, three 4-inch (100mm) woven mini roller sleeves, a 4-inch (100mm) foam mini roller sleeves, a 2-inch (50mm) brush, a plastic paint tray, 0.95m extension pole and adapter. The roller and brush feature a soft grip handle that is comfortable and easy to control. The roller frame in this set is equipped with patented Headlock technology to make your decorating faster and easier. Plus, the sleeves will not fall off the Headlock frames! Directions for use: To remove the roller sleeve, simply squeeze together the locking clips at the end of the roller head. This disengages the lock and allows the roller sleeve to be pulled free from the frame. To replace, simply slide a new roller sleeve over the cartridge and push the locking clips through the locking holes. Before first use, wash to remove any loose fibres, particles or filaments. Comb brush to shape. Before each use, wet fabric/foam sleeves, brush with water (or white spirit for solvent paint - foam sleeve and brush only) and remove the excess to a slightly damp state. After use, remove excess paint (with a roller scraper - fabric sleeve only), then wash thoroughly with water (or white spirit for solvent paint before rinsing with water - foam sleeve and brush only). Remove excess water with clean paper or an old towel. Spin to shape (fabric sleeve only), stand on end, comb brush to shape and dry naturally. Overloading can cause a patchy finish or cause skidding during use. Use a light sweeping motion for a good finish. Once dry, store in a roller and brush wrapper or a dry, dust-free place ready for your next project.