JML Drain Jet is an air-powered manual plunger for unblocking drains and plug-holes. The manual, pump-action, high-pressure plunger is designed to clear blocked drains quickly and safely without the need for harsh chemicals or the expense of electrical high-pressure jet blasters (that can damage your waste pipe system) or calling out emergency plumbers. Whether it’s a blocked sink, bath, toilet or shower drain, Drain Jet is effective at clearing most household blockages like soap scum, trapped hair, toilet waste and more. The three specially designed adaptors will accommodate most plug-holes and toilet U-bends and, because you control the amount of air pressure, you can apply just enough to remove the blockage but not so much that can damage seals and pipe connections.

Includes 3 adaptors to fit most plug-holes and toilets. The specially designed adaptors create a seal around the drain. Just connect the appropriate adaptor, pump Drain Jet to the desired pressure and place the nozzle over the blocked drain, plug-hole or toilet U-bend. With a pull of the trigger, pressurised air is shot into the drain, dislodging the blockage.

Protect fragile pipes from damage. Your waste pipes aren’t set up to take a lot of pressure, unlike water or gas pipes, so too much can break seals on pipe connections causing leaks and even more problems. Rodding and industrial jet-blasters can be too much for your pipes to bear, but traditional plungers are often ineffective because every ‘push’ is followed by an equally strong ‘pull’. Because you manually pump the pressure of Drain Jet, you can apply only the right amount of air pressure that is necessary, all in one direction, to clear the blockage and protect your pipes.