Strip away unwanted paint, varnish, and lacquer with the fast-acting Nitromors Paint Varnish Remover 375ml. It features a non-drip gel formula for vertical application and a green coloured indicator to make it easier to see where you have applied, reducing wastage. The double-strength formula strips up to twice the paint layers without damaging the object and can be used on interior and exterior surfaces. Nitromors Paint Varnish Remover is water washable, making it easy to clean up after application and removal, leaving behind a smooth surface ready for redecorating. Preparation: Extinguish all ignition sources (cookers, pilot lights etc.) Do not smoke. Wear suitable protective gloves and safety goggles. Wherever possible work outside. Other-wise ensure maximum ventilation by opening windows and doors. Do not use in enclosed spaces e.g. cellars etc. or in direct sunlight. Storage: Store container in a cool dry place, do not allow to rust. To use: 1.Pour into overcap and replace screw cap immediately. Apply a thick coat with a dabbing action (2-3 mm). Do not brush out. Only apply to areas up to 0.5 meter square. 2.Once paint has blistered (5-10 mins) apply a second coat, working into the blistered paint. Leave up to 40 mins. If dried out re-apply. 3.Remove blistered and softened paint with a scraper or shave hook. For difficult areas use an old nylon toothbrush. Repeat as necessary. 4.Wash off with detergent in cold water and nylon scoured or use white spirit and wire wool. Allow to dry thoroughly and rub down with fine sandpaper or wire wool before refinishing. Product benefits at a glance: High-strength paint and varnish remover. Non-drip gel formula for vertical applications. Features a colour indicator. For wood, metal, and masonry. Technology: Gel formula. Colour: Green