Enhance your space with the StoneCare4U Essential Tile and Grout Sealer Spray. It is a VOC-compliant, solvent-based formula designed for deep penetration into the grout. The spray works on walls and floors and can be applied immediately after grouting. The fast-drying formula offers instant protection against stains and does not change surface appearance. It does not penetrate the ceramic tile, porcelain, glass, or stone, and the grout will dissipate without leaving any residue. Moreover, it is non-yellowing, long-lasting and will not change the appearance of the surface. How To Apply: Make sure the area is well-ventilated before application, and ensure you are wearing personal safety wear, including gloves, eye protection and a suitable vapour mask. Make sure that the surface is thoroughly clean and free from waxes, sealants, or coatings of any kind. Next, shake the can well and spray 25 to 40cm from the surface. Apply the product evenly, wiping off any excess if spraying onto vertical areas. To sum up, allow the product to dry for one to two hours and test an area after application using water droplets. If the droplets don’t bead on the surface but are absorbed, a second or third coat may be necessary to attain the desired performance. Coverage: Up to 15m² per 600ml container. Quantity: 600ml.