Repair holes and cracks with our Ready Mixed All Purpose Filler. Our all-purpose interior filler is suitable for indoor repairs to plaster, plasterboard, wood, brick and stone. Once dry, it can be sanded, painted, drilled or plugged. The filler is crack and shrink resistant. It will fill holes and cracks up to 6mm. Easy to overpaint. Directions for use: Stir filler thoroughly before use. Ensure surfaces to be filled are clean, dry, sound and free from grease and dust. Touch in nails and screw heads with oil-based paint to prevent rusting. Only apply filler to a thickness of approximately 5mm in one application and allow to harden (for 24 hours) before adding another layer if required. Push the filler into the area to be repaired using a filling knife or scraper, and press into cavities. Finish with a slightly wet filling, knife or scraper so that the filler is level with the surrounding surface. Once hardened, use fine sandpaper to blend in the repair. The surface may then be painted or decorated as required. Replace lid after use. Clean tools with water before filler sets hard. Stone in a frost-free place. Size: 2.5kg.