Experience the ultimate protection for your outdoor frames with UniBond Brown Window and Door Frame Outdoor Sealant Cartridge. Its outstanding adhesion to metal, wood, UPVC, and polycarbonate ensures a solid and long-lasting bond. It won't damage delicate surfaces like marble or natural stone, so you can relax. This adaptable sealant suits wooden, metal, UPVC windows, doors, and polycarbonate sheets. It is also perfect for insulating, draught-proofing, facia boards, soffits, and exterior cladding. To gain a perfect seal, you must first ensure the sealed area is clean, dry and free of old sealant, grease and dirt. Also, to ensure that surfaces are as clean as possible, use a cloth damped with white spirit to remove remaining grease and dirt. Using a sealant cartridge and gun: Cut the tip off the cartridge above the screw thread. Remove the nozzle cap and trim the nozzle at an angle of 45 degrees to the desired joint width. Screw the nozzle onto the cartridge and insert the cartridge into the gun. Apply by pulling the trigger. Storage: Store in a cool, dry place and protect from frost and direct sunlight. It provides a 25-year guarantee. Direction to use - surfaces must be dry and clean of dirt, loose materials and old sealant. Prepare the cartridge and apply it by pressing the trigger. Smooth within five minutes to achieve a perfect finish. For the best results, use the UniBond Sealant Finishing Tool. Remove excess sealant before it dries with white spirit. Protect the sealant from water and dampness. Fully dry in 24-36 hours, depending on bead size, temperature and humidity. Coverage is approximately 11m with a 6mm bead.